Muc-Off Ceramic Protection Kit

 PREPARING THE SURFACE

1. Thoroughly wash your bike using Nano Tech Bike Cleaner, Punk Powder or Snow Foam, then ensure it is completely dry before starting the coating process
2. Depending on the condition of the paint or surface, perform the appropriate level of paint correction to remove any defects including swirl marks, water spots, and scratches. Keep in mind this product is very durable and will seal in any imperfections
3. Remove any excess paint correction or wax/polish residue by wiping all painted surfaces with surface prep spray. Simply spray onto the microfibre cloth and wipe down

CERAMIC COATING APPLICATION

1. We recommend applying the coating in a cool, dry, clean area, inside with good lighting and ventilation. For non-factory finishes test a small inconspicuous area prior to full coverage.
2. Shake the bottle thoroughly for 10 seconds to activate the formula.
3. We recommend wearing protective gloves when applying the coating.
4. Unscrew the child-resistant cap, then apply the coating sparingly and evenly along the provided microfiber applicator pad. (A little coating goes a long way).
5. Starting at the highest surfaces, work in a crosshatch #, overlapping pattern to ensure all areas are coated. We recommend limiting application areas to the approximate size of 1 bike tube/panel at a time. Relax and take your time, applying slowly and carefully for the best results.
6. Add additional coating to the applicator pad when the coating is not being applied evenly and or the applicator does not glide over the surface smoothly.
7. Allow the wet coating to cure for 5 minutes. During this time the coated surface will develop a rainbow-like appearance. In this time check that you have covered all areas. Using the provided microfiber cloth, lightly buff the surface using small circular motions to a high gloss, mirror-like finish. Be sure to check the surface in multiple light angles to ensure all the rainbow effect has been removed. Do not allow the wet coating to cure for longer than 5 minutes and ensure it has all been buffed off.
8. Once buffed off, let the coating fully cure for 24 hours in a cool dry place before exposing it to water or the elements. (For best results and adhesion, we do not recommend washing for at least 48 hours after application).
9. You can easily layer up the coating with a second application for even longer durability, simply follow the costing application instructions above after the first layer has fully cured. You do not need to re-prep.
10. Use within 6 months once opened
11. Go ride!

MAINTENANCE/CLEANING

1. In order to properly maintain your ceramic coating, we would only recommend cleaning using our Nano Tech Bike Cleaner, Punk Powder, or Snow Foam. Avoid using other solvents or acidic cleaners as these will break down the coating much quicker.
2. Keeping the surface clean will ensure you retain the hydrophobic properties of the coating.
3. If you notice the surface starts to lose some of the hydrophobic water-beading properties over time you can simply top up and refresh the coating. We recommend a top-up every 6 months to maintain optimal performance.
   

How many applications will I get out of a 15ml bottle?
On average you will get 2 full bicycles per bottle or one motorcycle

Why do I need to leave it for so long to cure after applying?
The coating needs at least 24 hours inside in the dry to properly cure and form a bond to the paintwork, so it is not ruined by rain. After 24 hours it's safe to use outside but we wouldn’t recommend washing or getting wet for at least 48 hours. The coating can continue to cure for 3-5 days after application so the longer you leave it the better the results and durability

Can I use Ceramic Protection on my car?
Yes, we've tested Ceramic Protection on a number of car finishes with excellent results. Watch our video where we use Ceramic Protection to coat a Porsche 911 GT3, where we used 4 Ceramic Protection Kits to completely cover the body of the car. We recommend using approximately. 3 to 4 kits to cover your car- but it will depend on surface area.

WATCH IT HERE 🎥(https://www.youtube.com/watch?v=BxwyaaacMLk)

As there are so many variations of paintwork, we can't guarantee that it will have the desired results on all. If in doubt, we always recommend testing on an inconspicuous area of the paintwork before fully covering your vehicle.

How long is the shelf life of Ceramic Protection?
Ceramic protection has a 2 year shelf-life from purchase, and we recommend using within 6 months of opening the bottle for best results

Is Ceramic Protection safe to use on a Titanium Frame / Matte Finish /  Gloss /  Frame Protection /  Carbon Fibre Frame
Titanium Frame - Yes it's suitable for titanium

Matte / Gloss Finish - Yes, Ceramic Protection is suitable for gloss and matt finishes. (After curing it will give a richer and darker colour tone on matt finishes)

Frame Protection -  Yes it's suitable to use on frame protection. We would recommend applying Ceramic Protection after installing Frame Protection though as the Frame Protection may not bond as well if applying after Ceramic Protection.

Carbon Fibre - Yes, we have tested on carbon fibre

Why ceramic coating? Why not wax? Or other protectants and polishes?

1. Ceramic Protection is designed to keep your bike cleaner for longer, protecting and prolonging the life of your paintwork.
2. In turn this investment helps maintain your bikes value, helps reduce your cleaning and maintenance time because of the slickness of the coating and gives the surface a level of gloss and colour depth incomparable to anything else.
3. It also contains UV protection to help ensure your paint doesn’t fade in direct sunlight and can help reduce the risk of micro scratches.

• Use within 6 months once opened. Keep cap tightly shut when not in use
• Store in a cool dry, dark place, out of direct sunlight and reach of children

CERAMIC COATING

DANGER: Contains 2,2,4,4,6,6-hexamethylcyclotrisilazane; Bis(trimethoxysilylpropyl)amine; Alkanes, C12-14-iso-.  May be fatal if swallowed and enters airways. Causes skin irritation. Causes serious eye damage. Harmful to aquatic life with long lasting effects. Keep out of reach of children. Wash hands, forearms and face thoroughly after handling. Wear protective gloves, eye protection, protective clothing.

IF SWALLOWED: Immediately call a POISON CENTER or doctor. If skin irritation occurs: Get medical advice/attention. Dispose of contents/ container in accordance with national regulations.

SURFACE PREPARATION SPRAY

DANGER: Keep out of reach of children. Highly flammable liquid and vapour. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. In case of fire: Use Dry Powder, CO2, Foam or Water Spray to extinguish. Contains: Ethanol. UN:1170 ETHANOL SOLUTION (ETHYL ALCOHOL SOLUTION).